Copyright © Breeze Co.,Ltd Introduction All rights reserved. Site Map
Product Description
The G800-A series angle sensor adopts MEMS technology and magnetoelectric induction technology. It uses differential array magnetic sensitive elements and non-contact measurement of the rotating shaft. It senses the parallel magnetic field intensity of the permanent magnet installed at one end of the rotating shaft and processes it through MCU to correct the linearity. , temperature compensation, output signal standardized digital filtering, zero point setting, programmable intelligent control of multiple different slope settings, to achieve the absolute angular position of the output sensor within the range of 0 ~ 360°. Accuracy 0.2°, output RS232, RS485, RS422, CAN, 0-5V, 0.5-4.5V, 0-10V, 4-20mA, 0-20mA optional.
All products have been calibrated, protected against reverse and pulse spike voltages, and tested for long-term aging stability before leaving the factory. Each process is precise and rigorous to ensure reliability under different working conditions and long-term use cycles; it has no contacts and long life. , high resolution, low temperature drift, excellent linearity, precise reset, high frequency response, multiple protections, anti-interference, vibration and impact resistance, suitable for water, oil, gas, vibration and other harsh industrial environments, making it a cost-effective angle sensor. It is also an ideal product for the replacement of contact angle sensors (such as conductive plastic potentiometers, encoders, and angular displacement sensors).
Main features
●Sampling rate 1K HZ
●Accuracy 0.2°, resolution 0.02°
●Wide voltage input DC 9~36V (5V can be customized)
●Wide operating temperature -40~+85℃
●Full temperature drift 0.15%FS
●Vibration and impact resistance
●Zero point can be set
●Range 0~360° (optional)
●IP66 protection level (IP67 can be customized)
●Output: RS232, RS485, TTL, RS422, CAN, 4-20mA, 0-20mA, 0~5V, 0.5-4.5V, 0~10V optional
Applications
●Motor control: servo system, corner position
●Textile machinery: tension control, shuttle wire diameter
●Valve: angle actuator
●Shipping industry: ship rudder position, hatch position
●Coal mining machinery: coal washer, concentrator, shield machine
●Medical equipment: CT, motor rotation
●Robot: attitude control, boom rotation
●Satellite antenna plane and pitch angle
●Car security control: steering wheel
●Crane, crane, excavator and other engineering equipment
Performance parameters
Product performance indicators | ||||||
parameter | condition | G800-A-90 | G800-A-180 | G800-A-270 | G800-A-360 | unit |
Measuring range(1) | 0~90 | 0~180 | 0~270 | 0~360 | ° | |
Temperature drift(2) | -40~85° | 0.003 | 0.003 | 0.003 | 0.003 | °/ °C |
Resolution(3) | 0.02 | 0.02 | 0.02 | 0.02 | ° | |
Accuracy(4) | -40~85℃ | 0.2 | 0.3 | 0.4 | 0.6 | ° |
linearity | 0.15 | 0.15 | 0.15 | 0.15 | %FS | |
Response time | slow/fast | 500/200μS | ||||
Power-on start time | 0.2s | |||||
Output signal(5)(6) | Digital TTL, RS232, RS485, RS422, CAN optional | |||||
noise | 5mV | |||||
Shaft rotation direction | Can be set clockwise or counterclockwise | |||||
average working hours | ≥55000 hours/time | |||||
Impact resistance | 20000g, 0.5ms, 3 times/axis | |||||
Anti-vibration | 10grms, 2~2000Hz | |||||
Operating temperature | -40~85℃ | |||||
waterproof level | IP66 (can be customized IP67) | |||||
Cable | Standard 1.5 meter length, wear-resistant, oil-proof, wide temperature, shielded cable 4*0.3mm2 | |||||
weight | 120g (excluding packaging box) |