Copyright © Breeze Co.,Ltd Introduction All rights reserved. Site Map
Product Description
The T7-C product is a new generation of digital small-volume MEMS inclination sensor with a built-in dual-channel earth gravity tilt unit. It measures static gravity acceleration and converts it into tilt angle changes. This allows measurement of the tilt and pitch angles of the sensor output relative to the horizontal plane. The output modes are RS232, RS485, RS422, TTL, and MODBUS level interface standards. Due to the built-in MCU control system, the linearity of the sensor output is corrected twice, which makes up for the decrease in accuracy caused by insufficient correction of the analog type.
The product uses non-contact measurement of the original quantity and can output the current attitude and inclination angle in real time. It is simple to use and does not require retrieval of the relative changes between the two surfaces for installation. It is an ideal choice for industrial automation control and platform attitude measurement. It is resistant to external electromagnetic interference and can adapt to long-term work in harsh industrial environments.
Main features
●Dual-axis tilt monitoring
●Full range accuracy 0.3°, resolution 0.05°
●Output frequency 5~100HZ optional
●Input voltage DC 5V (9-36V can be customized)
●Wide operating temperature -40~+85℃
●Measuring range 0~±90°(optional)
●High anti-vibration performance>2500g
●Baud rate 2400~115200 adjustable
●IP67 protection level
●Output RS232/RS485/TTL/MODBUS (optional)
●Small size (55*37*24mm) (can be customized)
Main features
●High-voltage wire tower monitoring
●Agricultural machinery, rotary drilling rigs
●Aerial work vehicle
●Mining machinery, petroleum logging equipment
●Medical equipment
●Gimbal leveling
● Hydraulic lifting platform
●Based on tilt monitoring
●Various engineering machinery angle control
●Bridges, dams, monitoring
Performance parameters
parameter | condition | T7-C-10 | T7-C-30 | T7-C-60 | T7-C-90 | unit |
Measuring range | ±10 | ±30 | ±60 | ±90 | ° | |
Measuring axis | X, Y axis | X, Y axis | X, Y axis | X, Y axis | ||
Zero temperature drift | -40~85° | ±0.05 | ±0.05 | ±0.05 | ±0.05 | °/℃ |
Sensitivity temperature coefficient | -40~85° | ≤200 | ≤200 | ≤200 | ≤200 | ppm/℃ |
Frequency response | DC response | 100 | 100 | 100 | 100 | Hz |
resolution | Bandwidth 5Hz | 0.05 | 0.05 | 0.05 | 0.05 | ° |
Accuracy | -40~85℃ | 0.1 | ° | |||
long term stability | -40~85℃ | <0.33 | ° | |||
Power-on start time | 0.2 | 0.2 | 0.2 | 0.2 | s | |
Response time | 0.01 | 0.01 | 0.01 | 0.01 | s | |
rate | 5Hz output, 15Hz, 35Hz, 50Hz, 100HZ can be set (RS485 does not have this function) | |||||
output signal | RS232/RS485/RS422/TTL/PWM/CAN/MODBUS can be ordered | |||||
average working hours | ≥55000 hours/time | |||||
Impact resistance | 2500g, 0.5ms, 3 times/axis | |||||
Anti-vibration | 10grms, 10~1000Hz | |||||
Insulation resistance | ≥100MΩ | |||||
waterproof level | IP67 | |||||
Cable | Standard configuration: 1.5 meter length, wear-resistant, oil-proof, wide temperature, shielded cable 4*0.2mm2 | |||||
weight | 75g (excluding packaging box) |